Aerosol sensor welas® 2070 P

Aerosol sensor pressure-resistant up to 10 bar overpressure

Downloads

Brief Description
Brief product description in two-pages as PDF
Product Description
Detailed product description as PDF
Aerosolsensor welas 2070 frei ohne SN.png

Aerosol sensor welas® 2070 P

Aerosol sensor pressure-resistant up to 10 bar overpressure

Description

Depending on the composition of the aerosol to be measured, i.e. the carrier gas component and the particle material, pressure changes in the carrier gas can significantly influence the particle size distribution and the particle concentration, e.g. due to condensation or evaporation.

For this reason, the aerosol sensors welas® 2070 P through to welas® 2500 P are equipped with a pressure-resistant cuvette to ensure isobaric sampling down to the sensor's measurement volume.

Küvette Aerosolsensor welas 2xxx P

Figure 1: Pressure-resistant welas® cuvette

The cuvettes are made of eloxed aluminium (black) by default. If the sensor is used in aggressive and corrosive aerosols, the cuvette can be made of stainless steel or other special materials, such as Hastelloy.

Sealed additional disks prevent aerosol from the cuvette from escaping into the surroundings. This even offers an advantage to the measuring of toxic substances under ambient pressure.

The additional disks are easy to clean and replace by the operator.

Datasheet

Measurement range (size) 0.2 – 40 µm (3 measurement ranges)
Measurement range (number CN) 0 – 106 particles/cm3
Thermodynamic conditions +10 – +40°C, ≤ 10 bar
Volume flow
5 l/min (others on demand)
Light source Xenon arc lamp 35 W
Dimensions
50 • 250 • 100 mm (H • W • D)
Weight
approx. 2,8 kg
Cuvette
Pressure-resistant

Applications

  • Determination of the separation efficiency of car interior filters, engine air filters, room air filters, compressed air filters, vacuum cleaner filters, cleanable filters, electrostatic precipitators, oil separators, cooling lubricant separators, wet scrubbers, cyclones and other separators
  • Isothermal and isobaric particle size and quantitative determination, for instance in the automobile, chemical, pharmaceutical and food industries
  • Analysis of fast, transient processes
  • Inspection of smoke detectors
  • Particle formation for cloud formation
  • Emission measurements
  • Immission measurements

Cookie-Einstellungen

Unsere Webseite verwendet Cookies, um Ihnen ein angenehmeres und sicheres Surfen zu ermöglichen.

Cookies sind für die Funktionalität des Benutzerbereichs sowie für die Warenkörbe notwendig.

Um unser Angebot und unsere Webseite weiter zu verbessern, erfassen wir anonymisierte Daten für Statistiken und Analysen.