PLG 系统

带 Laskin 喷嘴的液体雾化器,可加热,耐正压

Aerosol generator for the defined atomization of oils and use on filter test rigs
Aerosol generator for the defined atomization of oils
Aerosol generator for the defined atomization of oils, e.g., for blow-by applications
Aerosol generator for the atomization of aerosols under positive pressure values of up to 7 bar

为进行实际分析与比对,需使用真实场景中常用的液体(如水、DEHS、机油、白油等)生成液滴气溶胶。这些液体在黏度、表面张力及密度方面存在显著差异。

PLG 系统采用基于 Laskin 原理由 Palas® 特别研发的喷嘴系统,可长期保持高度稳定的粒径分布和颗粒浓度。

为适应不同应用场景,已开发多种型号版本。根据型号不同,液体可加热至高达 120 °C,并通过不同喷嘴实现约 3 mg/h 至 300 g/h 的最大质量流量雾化。该喷嘴还可在高达 10 bar 的正压条件下使用。

此外,气溶胶发生器可配备自动补液单元,以实现连续数天的物料分散。


Differences in PLG System

PLG 2000
PLG 2100
PLG 2000 H
PLG 2000 HS
PLG 2100 S
体积流量10 – 35 l/min3 – 110 l/min10 – 35 l/min10 – 35 l/min3 – 110 l/minDimensions300 • 330 • 270 mm
(H • W • D)440 • 380 • 380 mm
(H • W • D)300 • 330 • 270 mm
(H • W • D)300 • 330 • 280 mm (H • W • D)440 • 380 • 390 mm
(H • W • D)重量Approx. 9 kgApprox. 16 kgApprox. 11 kgApprox. 12 kgApprox. 18 kgSpecial featuresHeatable up to 120°CHeatable up to 100°CHeatable up to 100°C, with automatic refilling unitHeatable up to 100°C, with automatic refilling unit

Receive updates on exciting products & valuable news!