RBG 2000 D

Pressure-resistant at positive pressure values of up to 3 bar, higher mass flows

Downloads

RBG 2000 D

RBG 2000 D

Pressure-resistant at positive pressure values of up to 3 bar, higher mass flows

Still have questions?

Description

This device disperses particles at positive pressure values of up to 3 bar.

Please note: The 16-, 20-, and 28-mm solid material reservoirs are pressure-resistant; the 32-mm solid material reservoir is not pressure-resistant. The solid material reservoir with a diameter of 32 mm is able to be used in the RBG 2000 D exclusively under atmospheric conditions.

Nitrogen cannot be used as the dispersing gas in the pressure-resistant version of the RBG 2000.

Mass flows of RBG series.JPG Table 1: Mass flows of RBG system (compacted density 1 g/cm3)
Dispersion covers RBG.JPG Table 2: Dispersion covers
versions of RBG system.JPG Table 3: Different versions of the RBG system

I = version for inhalation
D = pressure-resistant
G = low feed rate
L = easily removable and weighable dosing unit
S = nitrogen version

Benefits

  • Pressure-resistant at positive pressure values of up to 3 bar
  • Optimal short-term and long-term dosing constancy
  • Double the dosing time in comparison with the RBG 1000
  • Disperses virtually any non-cohesive dusts
  • Easy to switch out different solid material reservoirs and dispersion covers
  • Easy to determine and adjust the mass flow
  • Able to adjust higher mass flows than the RGB 1000
  • Pulse mode
  • Easy to clean
  • Quick and easy to operate
  • Reliable function
  • Low maintenance
  • Reduces your operating expenses

Datasheet

Volume flow 40 – 80 Nl/min
Weight Approx. 40 kg
Particle material Non-cohesive powders and bulks
Dosing time Several hours nonstop
Maximum particle number concentration Ca. 107 particles/cm3
Mass flow (particles) 1 – 560 g/h (with an assumed compacted density of 1 g/cm3)
Particle size range 0.1 – 100 µm
Carrier/dispersion gas Air
Pre-pressure 4 – 8 bar
Maximum counter pressure Up to 3 barg overpressure
Feed rate

5 – 700 mm/h
Compressed air connection Quick coupling
Reservoir inner diameter 16, 20, 28 mm
Filling height 180 mm
Dispersion cover Type A, Type D
Aerosol outlet connection Dispersion cover type A: Øinside= 5 mm, Øoutside = 8 mm; Dispersion cover type D: Øinside= 5 mm, Øoutside = 8 mm
Power supply 115 – 230 V, 50/60 Hz
Filling quantity 36 g (reservoir Ø = 16 mm), 56 g (reservoir Ø = 20 mm), 110 g (reservoir Ø = 28 mm), 144 g (reservoir Ø = 32 mm)
Dimensions 1.160 • 530 • 500 mm (H • B • T)

Applications

  • Alle Anwendungen druckfest bis 3 bar Überdruck
  • Testen von Druckluftfiltern
  • Filter industry
    • Determination of fractional separation efficiency
    • Determination of total separation efficiency
    • Long-term dusting
    • Filter media and assembled filters
    • Dust filters
    • Vacuum cleaners and vacuum filters
    • Car interior filters
    • Engine air filters
  • Calibrating particle measurement devices
  • Flow visualization
  • Inhalation experiments
  • Tracer particles for LDV, PIV, etc.
  • Surface coatings

Downloads

Brief Description
Brief product description in two-pages as PDF
Product Description
Detailed product description as PDF

Cookie-Einstellungen

Unsere Webseite verwendet Cookies, um Ihnen ein angenehmeres und sicheres Surfen zu ermöglichen.

Cookies sind für die Funktionalität des Benutzerbereichs sowie für die Warenkörbe notwendig.

Um unser Angebot und unsere Webseite weiter zu verbessern, erfassen wir anonymisierte Daten für Statistiken und Analysen.

Contact Directly

Phone: +49 721 96213-0

Contact Form

Buy/Rent/Lease Product

Buy product

Rent or lease product

Newsletter

Subscribe to newsletter